AC SMARTSEAL Quick Shot™

REPAIR AC LEAKS QUICKLY AND EFFECTIVELY WITH AC SMARTSEAL QUICK SHOT

AC/ SMARTSEAL Quick Shot is our newest technology that does not require pumping down of the system. The re-usable injection hose will last for multiple doses and is operator friendly. This product is ideal for direct pinhole repairs and the prevention of refrigerant leaks. Our concentrate solution is a 100 percent green, eco-friendly AC leak sealant that is non-flammable, non-toxic, and safe for the user.

Learn More

https://www.coolairproducts.net/products/ac-smartseal-quick-shot/

Get this Item

Visit a HVAC/R Wholesaler near You!

Category:

Super concentrate solution
SAFE for the User | 100% green product
non-fLAmmable. Non-toxic
GUARANTEED permanent seal

  • Ideal for Preventing Refrigerant Leaks or Direct Repairs
  • Permanently Seal Leaks of Refrigerant Gas in AC and Refrigeration systems
  • Compatible with all Refrigerants
  • Polymer Free
  • Approved by OEM’s
  • Not Activated by Oxygen or Moisture
  • Non-clogging of all Components

SMARTSEAL QUICK SHOT INSTRUCTIONS FOR USE

DONE IN 4 EASY AND VERY FAST STEPS :

#1 Turn the A/C system on. If the unit is a heat pump, be sure it is set on cooling mode. Connect the cartridge to Easy Inject and fully inject sealant in it.

#2 Connect Easy Inject to the low-pressure service port of A/C system. Connect a charging hose to a refrigerant cylinder.

#3  Briefly open the cylinder valve to purge air out of the charging hose. Quickly tighten the charging hose fitting to Easy Inject. Inject refrigerant through Easy Inject and push sealant into the A/C system.

#4  Run A/C system for 30 minutes to allow the product to fully circulate.

* Use Smart Adapter Hose (#333) to inject without using manifolds.