High Torque, High Efficiency, Brushless DC (BLDC) Motor

• High Torque means power is always there on demand
• High efficiency means less mechanical and electrical stress; and long life
• Easily handles supply voltage variations; especially low voltage conditions
• Starts and operates in extreme temperature conditions, especially low temperatures
• Over 20% lighter than AC motor-driven pumps
• No low battery condition – No Battery to let you down

Performance and Ergonomics

• Convenient shoulder strap for easy carrying over long distances with built-in mount points
• Small oil bath requires less oil
• Built-in cooling fins to cool pump and increase performance
• Oil suck-back valve
• Elongated oil sight glass – easier to see oil level and condition
• Tethered oil drain plug

Features & Benefits

• Designed for use with A2L systems
• Isolation valve for oil changes without losing vacuum in the system
• Gas ballast valve keeps oil cleaner, longer during evacuation
• Internal intake check valve to help prevent oil backup into the system and to maintain vacuum during a power failure
• Intake filter screen keeps damaging particles from entering the pump
• Heavy duty rotors and bearings
• Built-in vacuum gauge
• Wide mouth oil reservoir port for easier, cleaner filling. Doubles as a pump exhaust – threaded to attach a garden hose for exhausting to a remote location.
• Large brass oil drain for easy access to fast oil changes
• Downward angled oil sump to remove contaminants usually trapped in other pump designs
• Non-sparking switch for A2L compliance
• Locking, low-profile IEC connector with 9’10” (3 meter) power cord to prevent accidental removal
• Heavy duty steel handle
• Lift hook for hoisting pump to rooftops
• IPX4 Rating – resistant to water splashes from any direction
• Two-year warranty
• Made in USA

SPECIFICATION

4.0 CFM Specifications

• 1/4″, 3/8″ and 3/8″ Male flare intake
• 36 oz. oil capacity
• 16″ L x 6.″ W x 11.5″ H
• 24.6 lbs. (11.2 kg)

6.0 CFM Specifications

• 1/2″, 3/8″ and 1/4″ Male flare intake
• 36 oz. oil capacity
• 16″ L x 6″ W x 11.5″ H
• 25.9 lbs. (11.7 kg)

8.0 CFM Specifications

• 1/2″, 3/8″ and 1/4″ Male flare intake
• 28 oz. oil capacity
• 17.5″ L x 6″ W x 11.5″ H
• 26.8 lbs. (12.2 kg)

11.0 CFM Specifications

• 1/2″, 3/8″ and 1/4″ Male flare intake
• 28 oz. oil capacity
• 17.5″ L x 6″ W x 11.5″ H
• 28.4 lbs. (12.9 kg)

DOCUMENTS