VIPER COIL COATING AEROSOL (12X1)

VIPER

COIL COATING

Viper Coil Coating is a permanent epoxy resin that we supply to factory OEM’S and coil manufacturers. It is the toughest and longest lasting coating you will ever use. It bonds to all metal surfaces and withstands temperatures to 400° F (205° C). The aerosol injector provides a flat spray pattern for reaching deep into the coil body. In the field, simply apply a single coat to the front and back of the coil. There will be no loss of heat transfer when used as directed.

SIZES: 15 OZ

Learn More

https://www.refrigtech.com/viper-coil-coating/

Get this Item

Visit a HVAC/R Wholesaler near You!

Product Documents

INFORMATION & DOWNLOADS

PDF Safety Data Sheet
PDF Product Flyer
PDF Technical Data Sheet
PDF Product Label
PDF Kosher Certification
PDF SB – 248

How to use:

  1. Turn off or disconnect all power
  2. Clean coil with Viper Brite, rinse and allow surface to dry.
  3. Always wear protective gloves, goggles, and clothing. Use in well ventilated areas.
  4. Hold can a few inches away, apply a single coat to the front and back of the coil and all metal parts.
  5. Wait 30-60 minutes for product to dry. A full cure may take longer depending on weather conditions.
  6. All Done!

Calibration Services for the Yellow Jacket
68602 Combustion Analyzer

At ACTOOLSOURCE.COM, we are proud to announce that we are now authorized to provide calibration services for the Yellow Jacket 68602 Combustion Analyzer. Our state-of-the-art calibration process ensures your analyzer is performing at peak efficiency, providing accurate readings for combustion, pressure, and temperature measurements critical to HVAC system performance.